|
|
|
|
|
|
|
|
#
1
 04-10-17, 07:46
|
|||
|
|||
|
Lowering Link Dimensions?
Does anybody know the dimensions of a XT660X (lowering) link?
If found some info for the XTZ ( https://www.xt660.com/showthread.php...light=lowering) but nothing for XTR/XTX.
Quote:
Greetings, Wauschi |
|
#
2
05-10-17, 12:46
|
|||
|
|||
This is the dimensions of the XT660Z 1" drop links. At least you can see all the dimensions and type of steel. It was done by a friend who is a mechanical engineer. Warning: the plating caused the 12mm bolts to pass through the holes with difficulty and I had to use some rubbing compound to widen the holes to 12mm.
__________________
2014 XT660Z - Barrett pipe, DNA stage1.5, Barkbuster hand guards and handlebars, Pivot pegs, Teknik suspension, Guard-it engine protector combo, B&B rear rack, Trax topbox. |
|
#
3
07-10-17, 03:30
|
|||
|
|||
|
12mm.... the XTR uses 16mm bolts..
I made mine from 6mm X 30mm stainless flat bar... 10mm longer = 25mm lower 20mm longer = 50mm lower and so on... is that pic correct.... 16mm OD radius with a 12mm hole only leaves a 2mm wall thickness... or is the 16mm radius refuring to the internal radius ? ...
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... Last edited by Petenz; 07-10-17 at 03:39. |
|
#
4
07-10-17, 13:05
|
|||
|
|||
|
Thanks for the update on the XTX and the thicker bolts.
The XTZ bolt diameter is 12mm and the outside radius of the plate is 16mm (32mm diameter) which gives 10mm space between edge of hole and edge of plate.
__________________
2014 XT660Z - Barrett pipe, DNA stage1.5, Barkbuster hand guards and handlebars, Pivot pegs, Teknik suspension, Guard-it engine protector combo, B&B rear rack, Trax topbox. |
|
#
5
08-10-17, 00:13
|
|||
|
|||
|
Quote:
.
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
 |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
