|
|
#
1
|
|||
|
|||
replacement brake pads
I think my rear pads need replacing as the pedal travel has increased (the power is the same though)
should I replace them with brembo or an alternative? braking power is not a problem. BTW what mileage should be expected from the rear pads? Mine have done 12.5kmiles |
#
2
|
|||
|
|||
I have recently replaced front and rear with EBC..bike had 10,000 miles on the clock..longevity depends on a variety of factors IMHO..riding style/braking style and conditions of the calipers themselves
I also replaced the brake fluid,takes about 15 minutes. Last edited by nikroc; 14-08-17 at 13:30. |
#
3
|
|||
|
|||
I got 11k out of mine but they were worn to about 0.5mm, too thin really, I went for stock EBC pads, they work just fine
|
#
4
|
|||
|
|||
I've had EBC and Brembo. Both good but the Brembo seem to bite a bit better.
__________________
Blue XT660X - MTC pipes - Kev Mod - Stage 1 - Puig screen |
#
5
|
|||
|
|||
thanks guys. I was thinking of brembos myself as the calippers are brembo already.
I wonder who makes the OEM pads |
#
6
|
|||
|
|||
One more question. What is the material of the OEM pads?
did you guys go for organic or sintered? |
Thread Tools | |
Display Modes | |
|
|