Here is the Dominator muff that needs sound damping for my test: So am I correct in assuming that a db killer will go in there [I removed the bolt] ? nothing moves ie there's nothing to take out of the can so the bolt is to hold an insert/db killer should it be possible to get one?

Thanks all

Attached Images

	Baffle0.jpg (187.3 KB, 5 views)
	Baffle2.jpg (185.7 KB, 7 views)

I use one of these on a non road legal can.
Look at this on eBay http://www.ebay.co.uk/itm/390846196557
Works quite well.
As it's straight I need to slice the taper to allow the baffle to form the angle of the cans end cap.

Attached Images

20170501_195110.jpg (204.2 KB, 6 views)

__________________
2011 xt660z.
Yoshimura cans ,kev mod,Dna 2, Stahlkoffer panniers,Hepco Becker box,Givi crash bars,Mita e07 tyres.

Thanks for that, I've seen 'universal' one with the curve in it...I presume it wouldn't fit yours is why you need to make the cut in this one?
I'll try find the link again...
So the 40mm diameter given is for the lip of the funnel at the bolt end?
30 mm is the inside diam of my Dominator can :
He states 'PLease check your inside measurement before ordering' but doesn't give this measurement in the ad for the baffle?!


[edit]
OK I'm with it now,I think:
The 40mm will go into my 42mm funnel end and the bore needs to be under 30mm.Do you know what it is off hand,at least then I can order?, I've messaged him but possibly wont get a reply till after the bank holiday....