Hi just something thats bugging me, does anybody know what the 10 mm allen key in the tool kit is supposed to fit.

__________________
XTz 660 tenere, adventure spec bash plate, main stand, skid marks tall screen, Oxford tail pack 36 litre. Kobra hand guards, Bigger cast footpegs, Zen overland luggage plate, USB power point, iridium spark plug, TKC80 f k60 R tyres, o2 and fuel Kev mods, DNA stage 2 filter. bark buster bar wieghts, Touratec side stand base and GPS mount. Led spot lights

+1 on that!

Think it's for the pre load adjusters on the front forks? (Could be wrong as not near my bike at moment)

__________________
XT660Z

AltecH Wheels
Wheel building and refurbishment, UK wide
AltecH Designs
XT660 Radiator guards, sprocket guards, luggage racks, DNA air filter covers

+1 on the fork preload. Used it alot before the WP fork swap.

__________________
To boldly go where no Tenere has gone before.

I can never work out why they give you tools to adjust front and rear suspension, but not enough tools to remove the wheels or adjust the chain.

The 10mm hex key is indeed for adjusting the preload, however... Not entirely sure why you get one in the tool kit on a post 2012 bike as the preload adjusters were changed to raised ones that require a spanner/screwdriver?

__________________

Pre-load adjusters are crap any way, just saves weight not having one LOL.

My front forks preload is altered with a spanner, so it looks like the 10 mm allen key is redundant, thanks for the replys folks

__________________
XTz 660 tenere, adventure spec bash plate, main stand, skid marks tall screen, Oxford tail pack 36 litre. Kobra hand guards, Bigger cast footpegs, Zen overland luggage plate, USB power point, iridium spark plug, TKC80 f k60 R tyres, o2 and fuel Kev mods, DNA stage 2 filter. bark buster bar wieghts, Touratec side stand base and GPS mount. Led spot lights