|
|
#
1
|
|||
|
|||
Brembo mags wheels fitted to the XTX- no mods to front!
Hi guys,
tonight i was contemplating a set of brembo rims for the XTX. I had them sitting around for a few years and thought id give it a try. well ****** me, the front rim bolted straight in! even the brembo xtx caliper bolted straight in and the axle was the same length! as for the rear its a bit diufferent the sprocket and disc lined up well but the axle was thinner and shorter. the disc was smaller and the sprocket was only 39 tooth. heres some pics: |
#
2
|
|||
|
|||
A tips for the rear wheel. Measure the outside diameter and thickness of the bearings, search then for new bearings with the same diameter and thickness but with inner diameter that fit the XT axle. Often there are alternatives just make sure that it is a sealed bearing.
Here is a bearings list for different motorcycles that you can use when comparing. http://www.newmotorcycleparts.net/ch..._bearings.html |
#
3
|
|||
|
|||
did you ever get round to finishing this??
|
Thread Tools | |
Display Modes | |
|
|