|
|
|
|
|
|
|||||||
| XT660Z T�n�r� Tech Section Tyres, Mods, Luggage & Long distance preparation |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#
1
 13-02-15, 20:22
|
|||
|
|||
|
Would you Adam and Eve it - rear bearing goes bang
An hour ago on my way home in heavy traffic and there is a horrible crunch noise. I coasted to a halt and look how I found my sprocket carrier. The bearing has cracked and it has taken the carrier with it. I've just got it home and I need to strip and assess it shortly. Anyone got a spare sprocket carrier.....
David. 
__________________
If you can read this you're faster than you look... |
|
#
2
13-02-15, 20:48
|
|||
|
|||
|
Is that a standard bearing or did you upgrade to a wider double row bearing?
|
|
#
3
13-02-15, 20:52
|
|||
|
|||
|
I haven't started stripping it yet but I'd say it's the original one.
__________________
If you can read this you're faster than you look... |
|
#
4
13-02-15, 21:02
|
|||
|
|||
|
Might be a good time to upgrade. Wheel bearings are something worth keeping a close eye on. Good luck with your repair. Important fact is you didn't slide down the road.
|
|
#
5
13-02-15, 22:38
|
|||
|
|||
|
Well that's FUBAR.
Good luck in the fix 
|
|
#
6
13-02-15, 23:11
|
|||
|
|||
|
Ooh, that's nasty!
Should be able to source a second hand one from one the many Tenere owners who've upgraded to a Talon/Excel rear? Or you could just get yourself a Talon/Excel wheel! 
|
|
#
7
13-02-15, 23:42
|
|||
|
|||
|
�114 from AJ Sutton - thats just for the carrier and then it needs studs, bearings and fresh cush drive rubbers. Bloody hell, thats just made Friday 13th for me.
D
__________________
If you can read this you're faster than you look... |
|
#
8
14-02-15, 00:24
|
|||
|
|||
|
Blimey that looks real crap. Second hand carriers are like hens teeth. I know that the 'R' one is the same. I'll keep my eyes peeled.
__________________
If I'm not working, I'll be 
|
|
#
9
15-02-15, 01:01
|
|||
|
|||
|
Result!
Don't think the sprocket is going to be any use though as Phil fitted a 525 kit to your bike. |
|
#
10
15-02-15, 02:18
|
|||
|
|||
|
the way the outer bearing race broke then took the
carryer out.... I'm wonder what the "c" rating of the bearing is ? If it's a 1 or 2 it would/could over heat & lock up.. the "C" rating is the clearance of the race to balls... should be at least a C4 for high load / speed grease lubed... all just a thought... right or wrong... .
__________________
Harley Davidson.. The easyest way to turn gasoline into noise with out the side efect of horse power... |
|
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
