|
|
XT660Z Exhausts Available exhusts for the new Tenere |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
Any ideas to silence MTC can?
Hello again!
I just want to ask a bit silly question, but.. Does anybody insert some db-killer in MTC sigle can? With stock "dbkiller" it is still VERY loud, and for the long distance riding it is just TOO ANNOYING and painful... Any ideas? Thanks.. I just preparing for the RTW trip and I do not want to go with stock silencer... |
#
2
|
||||
|
||||
Contact MTC & have a chat with them I am sure they can advise you.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
3
|
|||
|
|||
I think it was Steved who had Mtc make him a special baffle to have the can quieter. The other thing is you can blank off the end of the baffle and drill holes in the tubing
__________________
Plough on |
#
4
|
|||
|
|||
Have a look
here.
|
#
5
|
|||
|
|||
Actually you are right, it is too loud.
When I got mine it was too loud, I went back to the factory in my van and they supplied me with a pepperpot plate that was to be inserted between the link pipe and the silencer. It did quieten down but the restriction was too much and the bike performed very badly. I removed the pepperpot and went back again but this time with the bike and rode straight into the workshop and revved the engine hard............."very loud isn't it" was the reply. So they cut the inserted baffle down which did have some improvement and I decided to try it. I tried to live with the noise for some time but I couldn't hear my GPS at speed properly and last year I did some quite long rides, the can had to go. I'm now back on the standard set up. I can hear myself think, fuel economy has gone up but performance has not changed............and I really do mean that, performance has not changed! If you want to make your engine perform better then the DNA filter and Kev mod are all that is needed. Save your money for other things more important like beer The can and link pipe is available for anyone that is deaf. Oh yeah and I could have wasted more time going back to MTC but they have had their chance, more than I would give anyone else. End of!
__________________
If I'm not working, I'll be |
#
6
|
|||
|
|||
Quote:
|
Thread Tools | |
Display Modes | |
|
|