Not shore if I'm just being picky but I can hear a noise that only happens on acceleration in gear. The noise can be described as a hissing from the front of the bike and it can only really be heard if I'm in a tunnel or riding next to a wall it's only when the bike is under load. Is this just a normal induction or header noise ?


Time spent without rod in hand is time forever wasted.

__________________
Time spent without rod in hand is time forever wasted.

I shouldn't read too much into this. Could be induction hiss, could be AIS (but unlikely when accelerating). Could be a lot of things? If the bike is running fine, I wouldn't worry.

You could always fit a louder pipe and then you won't notice!

__________________

Lol exactly what I was thinking it still has standard exhaust bike runs fine


Time spent without rod in hand is time forever wasted.

__________________
Time spent without rod in hand is time forever wasted.

What you're describing sounds like drive chain noise, perfectly normal.

I know three Tenere that after 18 to 19 k km have a different sound in the exhaust muffler probably pieces of ceramic catalyst

__________________

No it's at all speeds and revs only when on the gas. I've put it done to ether normal drive sprocket noise or just the exhaust/ engine under load it can only be heard when in a tunnel or riding close next to a wall.

__________________
Time spent without rod in hand is time forever wasted.

Just sound rebounding at you from the bike / adjacent hard surface n a way you wouldn't normally hear it I would have thought.