Hi Guys,

Just picked up a new Tenere. I also have a 650 V Strom and a CRF450X. I'm hoping the Tenere fills the "gap", I'm too old for the 450 and I'm not a fan of sand on the V Strom. I'll keep the v strom for road and 2 up and make the Tenere an Adventure bike. Once its set up properly I'll sell the 450. Thats the plan anyway

One quick question. The screen vibrates badly between 3,000 and 4,000ish. Its definately the screen as I took it off and all is quiet. Is there a solution to this? Is it better/worse with a taller screen?

Cheers guys

Rich

and to

looks like you've found the ideal compromise

Welcome mate.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Welcome on board Rich.

My screen vibrated as yours does when I got my Z. The cause was the headlight unit touching the surrounding bodywork and not actually the screen itself, although removing the screen stopped the vibration (or rather changes the frequency of it) enough to prevent the buzzing noise. I found the best fix was to insert strips of cut up inner tube between the headlight and the bodywork. Did that six years ago and its still working now.

__________________

Thanks guys. I'll definately be trying the cut up inner tube fix! Sounds like a cheap solution, I've already tried moving the screen, various torques but the vibration is still bad...

Love the bike though, reckon its here for a decade or more...