Has anyone fitted one of these to a Ten?

I have a 2011 and looking for some inspiration as to location for the lube tube.

Any piccies folks??

Ta very big,

Sandman

__________________
2011 XT660Z, in BLACK of course!
Mods done:
Lost the will to keep track!

I have some pics in the mod section on my oiler routing...all this to say I have it dripping oil in the inside of the chain at the front sprocket so it can coat the centre of the chain along with the sides.




.

__________________
The Suit:What would you consider to be your greatest weakness?
Me: Honesty.
The Suit: Honesty? I don't think honesty could be construed as a weakness.
Me: I don't give a f**k what you think.

.[IMG] [/IMG]

Its a bit of an issue on the Ten as there is not enough room under the seat for a full Lube Tube. I ended up keeping two 3/4 filled Lube Tubes, connected with a t-piece tube, in a Tool Tube at the rear, the feed tube fed through a hole in the bottom of the tool tube.
How about the number plate reservoir option? Its neat.

Rob

Cheers guys,

I've ended up cable tying it to the outside of my tool tube. not exactly as hidden as I wanted it but best option.

Ride safe.

Sandman.

__________________
2011 XT660Z, in BLACK of course!
Mods done:
Lost the will to keep track!

__________________
check out www.redbikejohn.com for all the latest race reports from the CHEC and enduroland.

__________________
check out www.redbikejohn.com for all the latest race reports from the CHEC and enduroland.