Hey guys,

Wanting to know if I can use the forks, calipers, rotors and hub from the front wheel off a xtz and use it on my xtx. I want dual discs. So I want to keep the stock xtx rim but with the hub from a xtz.

Good question and I will be very interested to see what our experts say, as this would really improve the fairly average brakes on the XTX.....

__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km.
Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted.
Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres.

SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips....

Never though about that mod before.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Why?

Because i'm 160kg and i feel that i would be better suited with more surface area on the brakes to pull my fat arse up.

__________________
Regards John

Er well I weigh a bit less but 2 discs are always better than 1 methinks......

__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km.
Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted.
Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres.

SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips....

Hi all,
The idea is good.
I believe a good point to start at is the nimbler of spokes and the width of the hub. You will need the latter to know what spacers you will need and if eventually you will have to make special ones. The length of the spokes is an issue of course but can be solved.

Kev, please correct me if I am looking at the wrong direction.

__________________
that is how i feel about my XTR
Mods so far:
Hyperpro front springs; Hyperpro rear shock spring; modified air box; LED tail light; LED indicators + new relay; YZ pegs; Lucas aluminum bar; brisk spark plug; snorkel removed; DNA stage 1; second hand DynoJet O2 mod; crash bars; front and rear steel braided brake lines; soft EBC brake pads; mitas 07 tyres, 2in1 Metal Mule exhaust, Blocked AIS, tall OEM screen, OTR bash plate

Both rims have the same number of spokes (36) struggling to find hub dimensions if the xtz. I'll have to go to the local stealership with my verniers and measure up.

If anyone on here has that info it would be appreciated?

__________________
Regards John