Hi, I'm Steve and have just brought a used 2009 XTZ.
I'm glad it's used as it's no longer pristine so I can experiment a bit with it.
Only problem so far is tram railing from the offroad front tyre. Have reduced the pressure which cured to a degree. Have previously owned XR400, WR250 and Transalp.
Look forward to being part of this group.

and to

Until you get new tires keep the front at 28psi

Enjoy

Welcome on board Steve and enjoy the bike and this forum!!!

__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km.
Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted.
Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres.

SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips....

Welcome mate.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Hi Steve and welcome to the forum

Regarding the tram-lining, it could well be worth having a close inspection of the steering head bearings. The root cause may well be the tyres, but it is well documented that the headstock was terribly under-greased at the factory. Sticky, tight or corroded bearings will give the very sypmtoms you describe. Get the front wheel off the ground and investigate how smoothly the bars flop from one side to the other.

Good luck getting it sorted.

__________________

Welcome!

Hello Steve, XTZ rider from Bucks, UK!
My name is Steve, I'm an XTZ rider from Bucks, UK too!

Is yours a blue one? Might have seen you two-up on Marlow Hill the other day?

Mine's a dirty black one and I have a large Jolly Roger on the back of my jacket so give us a wave if you see me!