After I droped my 09 XTR in a river...
the head light would not work.. the little light above it dose work..
then the next day the tail/ brake light went...
When I turn the indicators on the Hi-beam indicator light
(the blue one on the dash) flashs with the indicators..
Have cleaned/dryed all conectors/plugs.. It's been 2 weeks
now so any water should have dryed up....


Any Idea's ?.. Bad earth somewhere...



>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...

Clean out the light switch on the bars.

yer..It was the left side it went down on...
Well that time

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...

Have you checked the H/L fuse?

Does the bulb work?

Does the pass switch light up the H/L bulb? if it does then there could be a problem with the H/L relay as the pass button bye passes the H/L relay or the left Hi/Low switch could be at fault.

Do you have voltage at the bulb on Hi & Low beam?

It there a good earth at the head light socket?

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Is anything still wet!!!! Get yer hair dryer on the switches and bulb holders and stuff plus loads of WD40......

__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km.
Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted.
Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres.

SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips....