I noticed water pouring slowly but steadily out of my bike,could it be a burnt cascet or a faulty water pump?

I guess you're up for a new pump seal.

salu2,
Joe

__________________
Saludos,
Joe
http://web538.ypsilon.ibone.ch/index...d=89&Itemid=42

neoprene fork protectors Acerbis / blue Puig wind shield / fork spacers 24mm / snorkel and resonater out / Acerbis hand protectors / 25 mm bar risers / 12 V outlet / "soft throttel mod" / engine protector home made / PC III USB / DNA ST2 / K&N ST 1 / BSM "Future extreme" exhaust / Wilbers "Adjustline" Shock / XTX links / luggage carrier home made / automatic chain oiler home made

Yep, I'd guess the seal(s) have gone (not the gasket), which is why the coolant is draining out of the hole in the picture on the bottom of the housing (which is there to stop leaking coolant getting into the engine oil and so you can visually see the internal seals have failed).

You really should remove the pump housing (both parts) and strip pump and replace the 'O' ring and the two shaft seals and refit the whole lot with fresh gaskets.

__________________

thanks a lot for your quick responses my friends!