|
|
Newbies Reception Lounge Newbie introduction forum, just say hi and show us your bike, tell us where you're from and how you've found us, and see how many will welcome you aboard!! |
|
Thread Tools | Display Modes |
|
#
1
|
|||
|
|||
just bought one
hi
just bought a 660 ten 09 with power com/leo vince/k&n do i need to alter the airflow at all also been lowered would like to get it back to standard height anybody got any links?? thanks. |
#
2
|
|||
|
|||
hi and welcome to the forum
Piccies are a must of your weapon!! The power commonder will have a map up loaded which alters the fuel/air ratio depending on throttle and gear position so it should already be setup (however if you change the air filter for a more freeier flowing one you will probably need to change the fuel map loaded on it)
__________________
Plough on |
#
3
|
||||
|
||||
Welcome mate.
A custom fuel map made for your bike will offer the best results in performance & fuel economy.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
4
|
|||
|
|||
Welcome.
__________________
>-------< Never underestimate the power of stupid people in large groups. |
#
5
|
|||
|
|||
Welcome, you found the right place, enjoy!!!
__________________
(Now sold on, sob) 2011 Blue XT660X with gold wheels, was 26,500 km. Engine mods: K&N Stage 1 filter, DNA Stage 2 filter, snorkel removed, Kev fuel mod fitted. Plus: smoked Puig screen, Yam aluminium sump guard, Yamaha / Acerbis handguards, Givi Trekker aluminium side cases, Leo Vince X3 cans plus Kev front fork mod and Fender Xtender. Just fitted Michelin Road Pilot 3 tyres. SOLD the XTX for a Super Ten 1200. And just bought a Raptor 700 so staying on here for some tips.... |
#
6
|
||||
|
||||
and
to
|
#
7
|
|||
|
|||
also been lowered would like to get it back to standard height anybody got any links??
thanks.[/QUOTE] Hello and welcome to the show. I had lingered here for a while and joined a few months back. It's a great community. The genuine links are cheaper than eBay. Standard links from Yamaha are only �6.70 each. |
#
8
|
|||
|
|||
picture
|
#
9
|
|||
|
|||
Welcome
|
#
10
|
|||
|
|||
Hello and welcome to
__________________
2011 XT660Z 2008 TDM 900 |
Thread Tools | |
Display Modes | |
|
|