Hey Folks,

I'm visiting family in the USA, and like a knuclehead, I forgot to write down the various tool sizes for my XT660Z Tenere, before I left Israel.

Would someone be so kind as to provide the OEM mm sizes of the following items so I can purchase some good kit here in the USA? Also, if you'd like to recommend a particular tool that works especially well on this bike, please let me know.

1. Rear and front axle bolts
2. Chain adjuster nuts
3. Oil drain bolts
4. Handlebar adjustment bolts

Thanks in advance, for your input! Ride safe, Bob

1/4" ratchet
1/4" T handle
1/4" extension bar
1/4" sockets 8/10/12/13/14/17mm (almost all nuts and bolts + oil drain plug)
1/4" socket adapter for screwdriver bits
10/12mm spanner (chain adjusters)
4/5/6/8mm allen keys
3/8" sliding socket bar short
3/8" 22mm socket (rear axle)
3/8" 3/8" 14mm hex (front axle)

(JMo's travelling wrench kit)

HJ

__________________
Riding the Mad Mule !! ... no more... went orange...

Thanks so much for the detailed reply Sir Single!

1 - small hammer
1 - medium hammer
1 - big hammer
1 - really big hammer

you should be ok to leave the really really big hammer at home.

1. Rear and front axle bolts 22mm wrench, 14mm allen key
2. Chain adjuster nuts 12mm and 10mm, should be in oem tool kit along with allen key for fork/ axle clamp
3. Oil drain bolts engine 17mm frame 13mm
4. Handlebar adjustment bolts not sure as i'm no longer standard

hope this helps, have a great trip!

Don't forget the mig welder, trolley Jack, and dynamite...pen and paper to jot down all the phone numbers of lady friends you meet on the trip.enjoy the trip

Alex

Sent from my X10i using Tapatalk