Just a few pics of my homemade tail tidy and rear light mod,light mod was from a pic on here.
I didn't do any measurements though,just started cutting and trimming till I got a result I was happy with.

Starting point

With the numberplate mount and light removed and some cutting done


Light unit trimmed down and speed clips fitted

Light unit turned upside down and slotted inside the undertray


Home made tail tidy

Fitted

Finished results


Just need some micro indicators to finish the job off

Clever idea that looks really rather good. Nice work.

__________________

Very good idea...but what about lighting up the number plate or have you done that

Sent from my X10i using Tapatalk

Have you fitted indicators / Where can you fit indicators.

Looks very tidy, well done.

Looks good, we first saw this mod back in 2006, a few forum members have done this mod over the years.

http://www.ganges.com/Panoramica_XT�...video_3034667/

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Just looking for some micro indicators at the mo,should be able to mount them above the exhausts,gonna cut a square out the light a put a pice of clear plastic on there.
Saw a pic of a Blue XT from an Italian guy on here and thought it looked good without any outlay.

This is exactly what I was considering, great to see it can be done, and looks good too, good job!