Want to get some bar risers as when up on the pegs the standard bars feel a touch too low.

in boots i think im about 6'4". So what bar risers would you recommend? i think they need raising about 25mm - 35mm but as im new to this im not really sure.

I'm 6' and use 30mm risers, you may need more?? 25-30mm is generally OK regarding cable lengths, higher ones may require changes, especially for the throttle. The ones I use are SW Motech.

http://www.motohaus.com/acatalog/Han...Equipment.html

__________________

i really cant be arsed with altering cables. guess 30mm will be my limit then.

This may sound stupid but do the risers come with the suitable bolts...or is that a seperate purchase?

I understand where you're coming from!

They come supplied with everything you need.

__________________

Venhill are surpisingly good value at altering cables...based in Dorking and do mail order if you send the old one back an' tell em' what you would like!

__________________
2008 XTR Mods : DNA Stage 3 Airbox, PC111, Carbon Cans Ovals, Steve Ruth built XTR734cc Big Bore with - High Desert Dyno (HDD)/ Cuervo Racing Gas Flowed / Ported Head fitted with +1mm Valves & uprated Springs, HDD 5050 Camshaft, HDD +3mm Throttle Body, CP 105.5mm 11:1 Piston, Custom Mapping, Piasini ECU, Renthal 613-01, Barkbusters VPS, Pivot Pegz, Touratech Bashplate, Foam Grips, Kev's O2 Sensor Mod, Kev's Extra Coolant Cooler, Wilbers Progressive Fork Springs and Rear Shock

yeah ive got Venhill brake lines on my Fazer. Ordered them and they were totally wrong, didnt fit at all. Took a lot of sorting out but got there in the end.

If im honest, i just cant be bothered. i dont have the time plus what time i have i want to be out riding. So, as it stands i wont get any risers more than 30mm so i dont have to alter anything.

Which ones did you use as there seems to be non specific to the Ten? Gonna go for a 30mm raise. Next job is to find some pegs, which is proving stupidly hard considering the Ten is a new and popular bike.

Cheers

Part No. LEH.00.150/30 - Universal

__________________

Lovely.....30mm universal risers here we come!!

Cheers

Phil, I have a set of SWM 30mm bar risers for sale.

I was planning to use them on my bike BUT I crashed before they arrived & replaced the bent original bars with Renthals.

They are for an XTR, which has a 22mm stock bar. If they will fit you are welcome to them for a price close to $SFA.

Boneman