|
|
#
1
|
|||
|
|||
Off Road 2 into 1 with Akra
Does anyone one run one of these,although I also assume one needs to be a lottery winner to afford one.
|
#
2
|
|||
|
|||
Apparently u can cobble ur own header together from bits of raptor header and pipes. Akra Ti slip ons come up on ebay now and again...
|
#
3
|
|||
|
|||
Fitted one last week.
Quote:
I posted some photos over at "what did you do your bike this week." Did 400kms on it on the weekend. Didn't miss a beat. Cheers, Boneman |
#
4
|
|||
|
|||
Here is the new pipe....
Here are the pipes just fitted, they are no longer shiny silver, discoloured a bit, but you get that.... The carbon pipe has lightened up the back end tremendously, much lighter, sounds great & I reckon looks good. Cheers, Boneman |
#
5
|
||||
|
||||
Does look good mate,
just make sure the headers don't burn the clutch cable just something to watch out for.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
6
|
|||
|
|||
Cheers Kev.
Quote:
PC5 may fix that particular fuelling problem when it comes?? Have wrapped the water hose in header tape since taking the photo, just in case the headers melt the hose. Have zip tied a cover onto the rear brake fluid hose but from what you say I might need to protect the clutch cable as well. Any suggestions to keep the clutch cable protected? Cheers, Boneman |
#
7
|
|||
|
|||
Quote:
Mate we will have another look at it and work on some protection, maybe make some covers etc. After I get back home that is, oh and when I finish that DR650. Cheers, Shane |
#
8
|
|||
|
|||
Is there an english version??
Otherwise, paste a direct link... Mod... Nevermind... http://www.creptus-eshop.cz/index.php/component/virtuemart/?page=shop.product_details&flypage=flypage.tpl&pro duct_id=61&category_id=67&keyword=660 Price?? � |
Thread Tools | |
Display Modes | |
|
|