hi all
ive just got a set of crash bars and cant fit the right hand side,due to the reg support bracket getting in the way,any of you had a problem fitting these? http://holan.pl/en/catalog/24/224/234/0/XT660_Tenere

ive had a go at fitting them loose,ive had a go at fitting the front bolt first,then even had a go at fitting the back bolt first,and it still seems to be way off from fitting the last bolt no matter how i do it

__________________
mickd (brisbane australia)ex-pommie

mickd

tenere xtz660 2016

hi all
here is a up date on the very poor fitting crash bars from HOLAN,after email after email to HOLAN i get the odd one back,ive sent them so meny pic's of there bars i am getting a bit peed off,well the last email they sent they told me to cut away the bracket on the crash bars and also get the angle grinder to them WTF??

so the next day i go into the shed, and do what they have asked,and you know what?? they stll dont f@#$ING fit

PLEASE DONT BUY THERE CRASH BARS FOR YOUR TENERE THEY DONT FIT

__________________
mickd (brisbane australia)ex-pommie

mickd

tenere xtz660 2016

Get a refund and then buy some Hepco & Becker's as they fit a treat!

Good luck..

__________________

will the hepco and becker fit even tho i'm using the original sump and crash bar mount OEM bits yam supplied it with. didnt really want to ditch all those bits to fit the h&b parts?

i might be wrong here but i could not see a small set of crash bars with H&B only the full large size,i would like the small set,

links if you know of any

thanks mick

__________________
mickd (brisbane australia)ex-pommie

mickd

tenere xtz660 2016

I installed H&B crashbars yesterday, however I have noticed that left side of the bar (below the engine) is lover then the right side. As a result, the ground clearance decreased around 2-3 cm. Is it normal (side stand mount protection) or I've just got some faulty crashbar?

I am also looking a small set of crashbars that protect the water pump and engine casings ,can anyone stick a link up and a few pics please .

Here -> http://www.adventure-spec.com/defaul...0z-tenere.html


if scaffolding is your thing.


or,,,

http://www.off-the-road.de/XT-660-Z-...-Z-Tenere.html

if you want something neat and tidy


OTR have been know for some erroneous delivery schedules, but I have always found them to be true to their word. I think the trick is to speak to them, don't rely on the web ordering.

In any case, the OTR engine guard was tested to destruction by JMo on the Heroes Legend Rally, and I've had one fitted for the best part of 20,000 miles through all kinds of terrain. My bike has had it's fair share of horizontal moments, no damage to any of the engine parts.

__________________
>-------<

Never underestimate the power of stupid people in large groups.

Hi gregdobrynin, I have H&B crashbars on my Ten, looks like they are not equally bent, but seems about equal in height to me...

@spen
I can recommend those H&B crashbars strongly, they protect most of the bike's sides and waterpump. I've crashed mine couple of times on both sides and the crashbars took all the shock, without any damage on the other bike parts. Might be a coincidence tho, but they're definitely aces in my book...

I bought them from a local dealer, but as I see OTR sells them also.

Attached Images

IMG_0392.jpg (122.4 KB, 13 views)

I have a touratech bash plate but I want some wrap around style bars .will have to order a set this week.