Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > Performance Modifications & Enhancements > Engine & Gearbox
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

Reply
 
Thread Tools Display Modes
  # 1  
Old 26-07-11, 08:06
FZ1 Racer FZ1 Racer is offline
Junior XT-Moto
 
Join Date: May 2011
Location: Marston Moretaine
Posts: 27
FZ1 Racer is on a distinguished road
Stage 1/2 cam

Hi Kev,ok so engine wise I've got stage 1 and 2 DNA filters,snorkel removed,Kev fuel mod,4mm oversize headers and Mivv carbon cans and adjusted CO up to 20 from 13 and I'm loving it but would like a bit more bhp without spending a fortune so my question is,is it worth putting a stage 1/2 cam in without modifying the head ie,gas flowed excetra,with a cam would I really need to get a PC to get the most out of it and what make of cam do you recommend,is OTR's cam any good,cheers.
  # 2  
Old 26-07-11, 13:15
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by FZ1 Racer View Post
Hi Kev,ok so engine wise I've got stage 1 and 2 DNA filters,snorkel removed,Kev fuel mod,4mm oversize headers and Mivv carbon cans and adjusted CO up to 20 from 13 and I'm loving it but would like a bit more bhp without spending a fortune so my question is,is it worth putting a stage 1/2 cam in without modifying the head ie,gas flowed excetra,with a cam would I really need to get a PC to get the most out of it and what make of cam do you recommend,is OTR's cam any good,cheers.
I would go straight to a stage 2 Hot Cam, I got 59 rear wheel HP. With the OTR cam you really need to add more compression as their cam is like a stage 3 Hot Cam & looses lots of bottom end when using stock compression ratios.

With all your mods now I would be saving up for a PCV or PCIII to correct the A/F ratio, you will definetly need a Power Commander with the hot cams.

I have a custom made fuel map for the stage 2 hot cam 660cc which will help you in the mean time until you can get a custom made map made.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

  # 3  
Old 26-07-11, 17:50
FZ1 Racer FZ1 Racer is offline
Junior XT-Moto
 
Join Date: May 2011
Location: Marston Moretaine
Posts: 27
FZ1 Racer is on a distinguished road
Quote:
Originally Posted by Kev View Post
I would go straight to a stage 2 Hot Cam, I got 59 rear wheel HP. With the OTR cam you really need to add more compression as their cam is like a stage 3 Hot Cam & looses lots of bottom end when using stock compression ratios.

With all your mods now I would be saving up for a PCV or PCIII to correct the A/F ratio, you will definetly need a Power Commander with the hot cams.

I have a custom made fuel map for the stage 2 hot cam 660cc which will help you in the mean time until you can get a custom made map made.
Ok,excuse my ignorance but do the hot cams for the raptors fit straight into the xtx with no problem and can I just go on eBay for one or can I get them through you or xt 660.com.thanks for taking the time to help out.
  # 4  
Old 26-07-11, 23:40
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
2006 to 2009 Raptor Hot Cams will fit the XT, you also need the decompressioner bits from a Raptor

http://www.xt660.com/showthread.php?t=5895&page=4

You can buy the decompressioner bits from USA Ebay for around $60.00. Get the below guys to supply the cam sprocket with the complete cam.

http://motors.shop.ebay.com/partsnewandused/m.html?_nkw=raptor+cam&_sacat=&_odkw=&_osacat=0&bk Btn=&_trksid=p3911.m270.l1313

You use the decompressioner parts from the standard cam below + sprocket from the Raptor 700 & fit them to your stage 2 hot cam.

http://cgi.ebay.com/ebaymotors/Yamaha-Raptor-700-Cam-Shaft-Stock-OEM-Intake-Exhaust-/140469008744?pt=Motors_ATV_Parts_Accessories&hash= item20b49af968

Hot cam

http://motors.shop.ebay.com/i.html?_from=R40&_trksid=m570.l2736&_nkw=raptor+70 0+stage+2+hot+cam
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946


Last edited by Kev; 27-07-11 at 02:04.
  # 5  
Old 29-07-11, 20:09
FZ1 Racer FZ1 Racer is offline
Junior XT-Moto
 
Join Date: May 2011
Location: Marston Moretaine
Posts: 27
FZ1 Racer is on a distinguished road
ok,thanks again
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:50.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top