Home

Go Back   .: XT660.com - The #1 XT660 Resource :. > XT660 Tech Section > General Help Section
FAQ Calendar Search Today's Posts Mark Forums Read Main site

Google

General Help Section Members help each other here with tips and tricks about mods / maintenance and servicing based on their own experiences

Reply
 
Thread Tools Display Modes
  # 1  
Old 20-04-11, 18:33
Adi Adi is offline
Newbie XT-Moto
 
Join Date: Aug 2008
Location: Bolton
Posts: 1
Adi is on a distinguished road
Question Error code 50........Kev

I'm having a few issues keeping my motor running, it will cut out after approx 10seconds everytime. I've looked through the diagnostics and have noticed two faults, 30 and 50. I'm wondering what needs to be done to get it working again. I've since reset the diag so it shows no more faults. Ive Searched for broken/corroded wires leading to the ECU but haven't found anything, I've also looked at the tilt sensor and nothing seems to be wrong with the wiring on that. Do these units fail?
It's an 05 plate and the recall has been done for the TPS in '06. No recall for the ECU though as apparently it wasn't needed.
Thanks for any help.
  # 2  
Old 20-04-11, 23:28
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
I offer personnel one on one help in the ASK Kev section, unfortunately this section is for supporting XT660.com members only, it would be unfair to the supporting members who have paid there membership fees for me to help you out in detail. What I can tell you is code 30 is for the lean anlge sensor we have seen a few problems with them, you need to read the workshop manual to see what the readings should be in the diagnostic screen. With code 50 you need to make sure the fuel pump runs at start up & check a few other things related to the engine ECU.

If you would like to become a supporting member it only costs a Teena & helps us keep this forum running. I receive no financial gain from the ASK KEV section at all, I also pay my 10 Pounds supporting Fee every year like the other supporting members, hope you understand.

http://www.xt660.com/payments.php

If you don't wish to join that's no problem, I am sure one of the members will be along to guide you through your problem.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946


Last edited by Kev; 21-04-11 at 10:54.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 16:23.
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

  XT660         Archive   Main site


Footer
vBSkinworks Top