I've Tried To Apply Wheel Stripe To My Wheels After Removing The Excel Stickers But I Had No Luck . Is There An Easy Way To Apply The Stripe ????

I've done this a few times... The short answer is, no there is no easy way! You need a bit of patience and go very slowly, bending the tape as you go.

I recently re-did mine, and found that buying pre-curved tape (you can get it on eBay) made the job really simple... Instead of 30mins, it was 10 to do the whole bike.

Storm

__________________
Racing
(a. & n.) from Race (v.t./i.)
The alchemy that turns base metals into heat, noise, power and motion.

I tried to do mine on a really cold day and the stripes were not happy, they kept snapping, they were almost brittle. I will try again when the weather warms up a bit or if I can find somebody with a nice warm garage.
Z

__________________

Pre-curved so much easier,

YES I KNOW .... SOMETIMES PATIENCE IS ALL WE NEED AND 10 BEERS TO APPLY THE WHEEL STRIPE RIGHT ?

you could save your money and not buy ten beers ,spend the money you have saved on the pre -curved stripes and you will also have the benefit of not shredding your patience fiddling about with straight tape.