6 months into the XTR despite the restrictor, I can wheelie it off the power in 1st and off the clutch. however anyone got any tips or tricks to wheelieing this beast?

and whilst Im at it, anywhere I can get XTR decals as mine are falling off?

Brill, thanks!!

Learn to save it with the bake brake is the first rule.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

My advice...

Don't!

I only say that cause I'm too weary and scared to attempt to do it myself, too much of a *****!

to those who can I say!

__________________
09 XT660X:

CCC Stainless Rounds, Stage 1 DNA, Stage 2 DNA, PCV With Custom Autotune Map, PCV AutoTune, Home made O2 eliminator, Self machined Fork Spacers, DIY Autotune Switch.

haha, I have been geting them quite good, first time was by accident in 1st gear, now have developed up to clutching it up. but have been Dirt jumping for years so handlebars firing up towards my face is nothing new!

Its a tough one this to be honest. Yamaha main agents are going to be able to supply you (expensive), forget Ebay they are silly money as well. My honest oppinion is go to a local sign writer and get them to copy a design or do you a customer job. Sounds expensive but compared to genuine decals not really. At least a sign writer will use a better material than the original ones.

Genuine decals are going to cost you about �150 a setv (ball park figure). They are guaranteed to peel off as well.

Would you consider a 10" large Yamaha roundal logo? I did mine and that was nice, I just chose the wrong colour for my bike.

__________________

WOW thats alot of money!! I have seen a few pics of people with a large round logo, I probably would be interested in that! so far each side has alternate parts of the decals missing haha.

was thinking of getting a monster energy theme going however i dont think it would suit the big front panels, so yea the big logo would look great where can i get some?

thanks alot. Iain

Monster decals dont look bad at all on the XT, a new guy on here has some and the bike looks superb. Link below to where I got mine and a photo of them fitted to my bike. As I say I got the wrong colour, I should have got white. In fact I may order them later!

Link to supplier - �5.99 for the pair plus postage.

http://www.awesomegraphics.co.uk/epa...%5B266%5D-0001

__________________

Ah Brilliant thanks!
yea your decals look good because theyre subtle, but like you say white...or black would would better!
thanks for the link, I will have a look into some, its those or Monster so either way I will upload a pic of the finished job!!

I like that colour Tony, which colour is it?