|
|
#
1
|
|||
|
|||
Chain and sprockets
whats the Best chain and sprockets for my bike its an 05 xtx and want a bit more wheelie fun but dont want to risk much top speed looking at a regina and DID kit but didnt know what amount of teeth to get all help welcome please
|
#
2
|
|||
|
|||
DID 520 x-ring should be all you need, check what rear sprocket is on it and go up a tooth but you should be able to get it to wheelie of the throttle without dogging it. Any tooth change to improve wheelies will compromise top speed - you have to choose one or the other unfortunately!
__________________
If you can read this you're faster than you look... |
#
3
|
|||
|
|||
DID VM520 or RK XSO are both very good chains, there is allot of good deals now on the DID VX because it is old and the dealers try to get rid of the stock
but i would go for the VM and not the VX. With the Regina that came with my bike i had bad experience it was holding only 15,000km and usually i get much more because i use an oiler. |
#
4
|
|||
|
|||
thanks for the info folks,i hopefully have a few performance bits coming in a couple of days so shouldnt have to change the standard size sprocket,it does wheelie in first off trottle but needs clutch on second gear hopefully the pc3 and filters lets it lift off power in second
|
#
5
|
|||
|
|||
Also want to know what standard size front and rear ordering a set 2moro and want to order oem sizes isit 15f 45r
|
#
6
|
|||
|
|||
Look for Supersprox sprockets- it's looks very nice
__________________
http://www.bikepics.com/members/berserkers/ |
Thread Tools | |
Display Modes | |
|
|