|
|
#
1
|
|||
|
|||
Power Commander "Accell Pump Utility" Enable
Whats this....I cant find it in the tutorial? On PC111, when you load the disc intially. Any ideas?...
after a bit of a google, it gives a short power burst....! Has anyone tried it? Its only on the later "USB" PC111 Last edited by richardsracingmad; 15-07-10 at 09:42. |
#
2
|
|||
|
|||
After a call to Simon at Powertech, it is an extra feature that assists in a situation like gassing the throttle from 45mph in 5th gear. It will help eliminate hesitation, and he says its more of a fine tuning feature to suit the rider.
So its not Nitrous Oxide then!!! (you should see some of the exitement about it on some other forums!!! ...you would believe it was the Holy Grail!!) Now this may sound like I'm really soft (yep!!), but I only fitted the PC111 yesterday, and its hosing down at the moment. When the weather brightens up, I may well just venture out for a test on my new "fairweather-only dirtbike"!�!!!!!!). Great bike tho!!!! |
#
3
|
|||
|
|||
Always a sound move.
__________________
>-------< Never underestimate the power of stupid people in large groups. |
#
4
|
||||
|
||||
If your fuel map is made correctly you do not need to use the Accell Pump Utility.
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
Thread Tools | |
Display Modes | |
|
|