Fitted a RENTHAL dakar high handlebars as i like the way they are wide so dont feel like push bike with the standard ones.

Problem is on nearly 3/4 lock to the right the throtle cable go quite solid.

Need extended cables?

Any one has idea fitting them form something else?

I am at point to contact venhill.co.uk aparetnly they do custom cables?

Any help will be great.






:tenere:

Run the standard cables behind the top triple clamp instead of in front.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

do the renthals give you a nice rise over standard bars without using extra risers ? I'd like a better position for standing

Just Update if some one is intrestead.

The Dakar High Handlebars are a bit wider a sligtly taller i am a 180cm and just perfect standig up.

I have been in contact with Venhill as i mentioned earlier

I do have spare set of OEM Throttle (they arrived at last) ( 5VK-F6311-00-00 + 5VK-F6312-00-00) cables witch i will send to Wenhill they told me they do me a longer ones for �30 + postage

If any one intrested let me know i can get them to make more ore something.

That looks like will sort them out.

Will post som more info as soon as they get done

__________________
XT600E

Thanks for the tip - however Venhill sent these back. The fittings on the left are theirs, mine are on the right. They say theirs are the Yamaha ones
Any suggestions?

Attached Images

IMG_2680.JPG (57.5 KB, 19 views)

If you get stuck my friend Tom at Foundry Motorcycle's near Chichester has professional cable extending facilities. I'm going to fit the same handlebars. ..I'll be interested to see a photo if you can post. Steve