Has anybody experienced any indicator problems? I have what can only be described as a sticky or non responsive switch. I can flick the switch to indicate right or left and yesterday I noticed the indicators werent coming on, if I press the indicator switch and flick again it does come on.

Its a bit alarming as I didnt really notice until yesterday as you dont tend to look down at the tell tale light, I just signal, turn and cancel the signal automatically.

I'm guessing I need to get it back to a dealer but just wondered in case it was something obvious I could quick fix myself. As I say its intermediate too, not every time.

Never had any issues like that with mine, I would suggest a good quality switch cleaner sprayed liberally into the switch and give it a good wiggling, probably just dirty contacts inside.

__________________
I'm always in the sh1t, only the depth varies

Thanks for that, any recommendations to use?

Theres lots of brands out there, preferbly something with a high flashpoint so that it doesnt leave any residue, sprays like wd40 leave an oily residue so are no good on electrical circuits. Ask specifically for electrical cleaner.

__________________
I'm always in the sh1t, only the depth varies

I found maplin do a quality electrcal cleaner and about the cheapest too

__________________



OFFICIAL CRASH TEST DUMMY

I'ev used brake cleaner spray before for things like this - worked for me!!