Hi Guys
Been running my XTX for about 6 weeks now after buying it 2nd hand. The bike was registered in May, so less than 6 months old. Had a problem tonight - basically noticed as putting my gloves on ready to ride home from work that the tail light wasnt on. Under Insvestigation it was the tail element in th e bulb broken. Luckily there is a car workshop round the corner so got a new bulb fitted - Lovely. Rode 12miles to tesco to fill up and guess what? Bloody light off again!! Just what you need in pitch black and foggy conditions!! Obviosly lost no. plate too....Luckily brake light works still. When I got home I checked bulb again and it had gone black and sooty this time. Could this be vibration?? (rear light seems to pivot?)
Too late to call Yamaha when I got in but as the nearest dealer is a 50mile round trip I wondererd if any one experienced this? Obviously may be something simple but am reluctant to take it anywhere but Yamaha as it is still under warranty. Im fortunate to own another bike that will come out of hibernation for rest of week but it is a pain in the arse!!!
Thanks in advance

I had this with mine last winter. It looked like the bulb was just shaken to death. I think after a while all the bits on the bike work loose a bit and shaking gets worse. The garage fixed it by sticking some rubber from an old tube between the headlight holder and the frame. Never had a problem after that.

Make sure you are using good quality bulbs, those cheap ones do not last.

If you move the rear tail light around you will find it has quite a bit of free play. Get some foam & pack it behind the tail light assembly to support it, that should help.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Or do what I've done and buy a LED replacement stop/tail light bulb off evilbay.
Had the same problem, and leaving for work at 5 in the morning I didn't need the hassle.

Fitted LED rear bulb last night but wasnt that impressed in difference when brake lever pulled! HOWEVER even that blew this morning on way to work so bike booked in 1st thing sat am for inspection @ Yamaha!!
Will let ya know what they find....However have ordered 10 x bulbs for future off ebay and will deffo look to "pad" out area around rear lens.
Many thanks guys!!

just bought some heavy duty stop and tail lamp bulbs from Halfrauds, supposed to be for trailers and 4X4's so should be OK for XT's vibes I hope.

My route to work is mainly on a concrete dual carriage way so vibes are a constant problem my old bike blew tail lights like it was the fashion and the XT has eaten 3 recently