|
|
#
1
|
|||
|
|||
Which CCC?
Hi all, I've been looking at the CCC cans and I'm very much interested. couple of questions though. How loud are they? I had a Harley Sportster with screamin' Eagle pipes and I wouldn't the XT to be any louder. Also is there much difference between the titanium and stainless apart from price?
THANKS. T. |
#
2
|
|||
|
|||
What colour is your bike? Mine is orange and the Stainless steel ovels look great
CCCs are know where near as load as a Harly so no worries there! Just be aware that people have had issuse with CCC since they have been taken over!
__________________
|
#
3
|
||||
|
||||
Quote:
__________________
|
#
4
|
|||
|
|||
Ive a set of CCC S/S full length round cans and they are loud even with the baffles in and with them out can only be compared to a Dakar race bike.
I got mine before the change in management so they where delivered in time but still i got the wrong clamps but 2 days and the corect ones where sent out. Great cans really in my opinion. The difference in S/S and titanium is price as you say but also weight. The problems people have are with oval cans are they dont seem to sit square and when the suspension near bottoms out the rear tyre rubs on the clamps/exhaust. The new problems as stated are with deliveries, getting the order correct, wrong this that and other and missing bits.
__________________
Plough on |
#
5
|
||||
|
||||
[quote
How loud are they quote]
CCC ovals. 94db at 3000rpm baffels in. 102db at 3000rpm baffels out
__________________
Click here to join the XT Supporter's scheme Mods that I have done to my XTX's My 04 XTX Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil / [ My 07 XTX Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator / My 09 XTX 59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details Now ride a 2018 MT09SP ABS + TCS My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946 |
#
6
|
||||
|
||||
This post has been moved in the Exhausts section as it was posted in the private XT Supporter area where regular members could not see it. I think this subject is for everyone's attention and should be in the public area.
Thanks for understanding. |
#
7
|
|||
|
|||
Hey Capt quite right!
Thanks for the info folks. These delivery issues have me worried. I've checked the photos I love the pipes and for the money you can,t beat them but a cheaper product is no excuse for poor service. |
Thread Tools | |
Display Modes | |
|
|