Dear Fellow XT Enthusiasts

I've just imported a Tenere into Singapore from London. Unfortunately the shop who sold it to me left out some bits and pieces. They did ship them to me but I'm struggling with the nuts & bolts that hold the windshield on.

The is what they sent me - see photo. Grommets fit ok but the rubber covered nuts seem to be too big to go through the grommets.

There are no other Tenere's in Singapore that I know of to see how this all fits together.

Unfortunately the shop where I bought the bike is not very helpful post sales!

Grateful if anyone can clarify on this - it would be nice to get the shield in place!

many thanks

Kevin
Singapore

Attached Images

Tenere - Correct bits for Windshield.jpg.jpg (115.4 KB, 24 views)

IF you need any parts shipping from UK and ordering from dealer, just ask and i'll order them ans send over.

p.s. what photo ?

__________________

Can't see any photo's, please repost them so we can help.

__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Plenty of people on here will help you out with the information you need.

Just cant see the photo of what your talking about!

__________________
Plough on

Many thanks Weeksy, Maxwell and Kev. Managed to upload photo now, cheers Kevin

Hi Kevin,

press the rubber covered nuts from the front though the holes in the lamp mask.
Place the windscreen in front and use the plasic screws to fix the screen.
At my Ten these grommets aren�t used at the windscreen.
Only the screws and the nuts.

If you send me a PM with you email, I will send you a some drawings.

Regards
ToKi

Many thanks ToKi - will send you PM shortly. Cheers K.

Many thanks to all for their support! Problem solved! Cheers Kevin

Well done for importing the Ten. In fact 5 units arrived in Singapore more than a month back. Now awaiting approval on the road. I am sure you saved a couple of thousands with your own import. See you on the road soon!