Thread: Rear Sprocket
View Single Post
  # 6  
Old 22-06-09, 13:10
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by paulba View Post
Thanks for the help Kev,
I've been running a 46 for the last 20,000Km witch was put on at the same time as the PCIII. As most of my commuting is at 80 - 100km/h (plus that little extra that's needed to keep up with the traffic) I would like to drop the revs a touch, I find that the surging is minimal (for a single) and dont think dropping back a tooth will make much difference to the surging.

You have obviously tried a variety of combinations and if you have a better idea, I'm listening.

Regards

Paul
I have tried, 15/45, 15/46, 15/47, 15/48, 16/45, 16/46.
I would try 16/46, that will give you a better cruise speed. I found 16/45 to tall for me, great if you want to cruise at 130/140KPH.

You can buy 16T in Oz.

http://www.jtsprockets.com/52.0.html...sel_uid=2450&p=

http://www.jtsprockets.com/fileadmin...tgearratio.pdf

Let me know what ratio you would like & I can check stock in Brisbane for you.
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Last edited by Kev; 22-06-09 at 13:39.