I mounted 1 of the relays in the left fairing (where the indicator is mounted) this is a 2 part plastic thingy with lots of air in it. The relay is directly connected to the 30A screw mount below the tank and I must say this works great. The controller for the relay is the main light so when I turn it on I clearly hear the new relay kicking in. The output will be my LED lights that are on its way...in case you are curious I made sure there is long enough wires so the fairing can be removed and dismantled.

So the next thing to wire up is the heated grips. It will be controlled by a relay as well so I do not forget to turn it off... This relay will be on the right side and the controller will be the spare connector in the dash.... And this connector will also provide power to the dual USB port to be mounted.

For a few hours work I'm really pleased with the outcome.

I'll upload a picture tomorrow...