Hi Rob. Shame you had to join the forum under unfortunate circumstances.
Quote:
Originally Posted by
Robeco
I replaced the clutch cable and soldered up the wires, but not the bike doesn't want to start (just turns over but no spark or fuel), the oil light is constantly flickering and the key light never comes on... does anyone have knowledge of this problem? Any suggestions?
|
Sounds like there's still an issue with the wiring somewhere regarding the flickering oil light. As for the immobiliser (key) light not flashing, it may well be that the back-up fuse (#6/10A) might have blown when the wires were cut. This fuse supplies the LCD panel back-up and the immobiliser circuit - basically all the circuits that are live when the ignition is off and key removed (hence why it may have blown when the wires got cut). Check this fuse and report back.