Revs 'sticking'/high idle when pulling clutch
Hey guys,
I've had an odd fault develop over the few days/week. On occasion, i noticed when pulling the clutch in to blip/rev bomb that they were sticking slightly above idle, around 2,000 rpm, when pulling the throttle to blip it would just bog out.
My bike is now doing this almost every time i pull the clutch in when riding. For example, shifting down gear and stopping at a set of lights i can notice that the idle seems to be higher than should be for about 3/4 seconds, and then settles to normal again. In this period of higher revs if i blip the throttle the bike just bogs.
The bike doesn't do this at all once it's settled. So after the idle is normal i can sit revving the engine with no problem if I wish. However, when riding again it will 'stick' when the clutch is pulled in.
I've not changed anything recently, and have Kev mod, DNA 1 & 2, no snorkel and aftermarket pipes.
Thanks.
__________________
|