Quote:
Originally Posted by
majland
No need to cut wires
There is a small 12V connecter behind the plastic covering in the cockpit below the spedoo. You can onluy draw a few A but enough for a GPS.
I've just but some soldering tin on the end of the wires and put them in the connector and then secured it with electrical tape and cable binders
|
Exactly. Hey Jaques, check this out.
http://www.xt660.com/showthread.php?...t=Power+supply
That's the connector that you need. Cut it off and connect the GPS power lead, complete with fuse to this SWITCH powered connector. I just soldered to wires up but a crew type connector is sufficient if you wrap with insulating tape.
Cheers Steve