View Single Post
  # 7  
Old 17-11-15, 09:22
Nener Nener is offline
SemiPro XT-Moto
 
Join Date: Jul 2015
Location: Marseille
Posts: 39
Nener is on a distinguished road
I'm bumping this topic, as i ordered the same stuff as J_maker: did chain, sprockets, and ohlins fork springs (8716-60.) (from OTR)

but that's for a xtz.. and I measured the springs at 593mm like Pleiades wrote they should be. But no spacers in the box.

I planned to order Teknik cartridge emulators also, so the 40 mm ohlins spacers would not have been the correct size anyway, right?

And i suppose Teknik provides spacers with their emulators, that i will have to cut at the correct size? (40mm- emulator height )

Last edited by Nener; 17-11-15 at 09:42.