easy as.... lay the bike on it's side...
remove the outer side cover.. then undo the 6
bolts holding the pressure plate on... lift the plates out
keep track of there order in the basket when you remove them..
when you put the outer case back on..make sure the dot on the arm &
the dot on the case line up...
before you pull the plates out make sure there is free play in the clutch cable
& it's not holding the clutch stack slightly open...
My thread on putting a rekluse clutch in the XTR... the pics will
give you a idea of whats in there..
http://www.xt660.com/showthread.php?...reKluse+clutch
tools required are a 8mm & 10mm socket , maybe a new gasket for the case...
A set of EBC heavy clutch springs & do Mr Bilgbay clutch lever mod "lengthen" would also be a good idea..
http://www.xt660.com/showthread.php?...ghlight=clutch