hi guiys,
just a quick problem I have after stripping my recently purchased bike for a frame paint. the battery keeps dying after a few hours riding. Ive swapped the battery for another fully charged one, then it died as well. I then checked the eroor codes and the code 9 reads 0.0v (code 9 is battery voltage). yet with the kill swiotch on run it reads 12volts.

I then swapped the voltage reg for another one that I know is good, ran the bike for 30 seconds, then re-checked the error code. code 9 still reads 0.0v. and 12v with the kill switch on run.

I hooked up a multi meter up and its reading about 14.5v across the battery terminals with the headlight on and the bike running... same with both regulators...

any comments?