They fit with my Yam handguards, I know the BarkBusters are a bit deeper.
The only slight problem I have is that the muff tends to touch the Full beam switch... only lightly but this is a bit annoying.

The reason why I went for the R319 is so that I could decide where the bar end comes through the material.

With the other version, the bar end hole is pre-designated.

You'll want to fit bar ends through them, as when taking your hand in and out (especially clutch side) I find the 'muff' material can get a bit caught and move the whole bag around on the bar.


I have excess material to go around the mirror and cabling, (easily sorted out with cable ties) so you should be OK in that respect.

They do have a stiffening material on the front but I think it should accomodate the BarkBusters.


These are popular items though, so even if you buy a set and find it doesn't fit, I'm sure you'll get a good re-sale value on eBay.

__________________
Bike: 2013 XT660Z, TKC70 tyres

Mods:
Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod

http://www.facebook.com/onemooseonemotorbike