There's nothing in the Yamaha toolkit for this...


http://www.amazon.co.uk/Teng-M121514...dp/B0001P0WMK/

This'll do the trick.

There are cheaper options (such as sump drain tool) but I always trust Teng tools.

(assuming that you carry a 1/2" tool around with you)



Just taken mine off today for winter prep / greasing and copper slip.

Brake calipers (2 x M8 / 13mm Socket) [40NM torque]

Axle Pinch bolts (2 x 6mm Hex) [18NM torque]

Axle Bolt (14mm Hex) [60NM torque]



Also, when your wheel comes off and both spacers fall out and roll away, the long spacer goes on the left hand side (if you're sitting on the bike)

__________________
Bike: 2013 XT660Z, TKC70 tyres

Mods:
Barkbusters, Scottoiler, DIY Tail Mod, DNA Stage 3, Power Commander V & O2 Eliminator, Exan X-Black Stainless exhaust, Tool tube, Ohlins linear front fork springs, Nitron rear shock, JT front and Supersprox rear sprockets, D.I.D. VX 520 chain, Adventure Spec bashplate, DIY USB Outlet, DIY chain guide, Kev's Throttle mod

http://www.facebook.com/onemooseonemotorbike