sorry for the late reply.

Im just doing the job at the moment.
I made up a 5mm thick alloy plate for the ignition lock and a plate for the disc mount.
everythings going well with hardly any mods. bearings etc fitted perfectly.
the kawasaki forks are about 3" longer, so I've sat them higher through the clamps.

I will have to weld a small piece of solid steel for a steering stop that will be at the front of the lower bearing holder.

I shaved about 3mm off the ignition lock bracket thats welded to the frame so as to clear the ignition lock bracket I made.

steering lock still works fine.

I had to belt the bracket I shaved down a little bit as the handle bar mount nuts were rubbing on it.

I have 2 XTX's so will compare the handling over stock suspension soon as shes back on the road.

will post pics in the next couple of days of the completed project...