yes....
I made mine.... they work well...
the trick is connecting the two togeather
on the same bolt... easy to do...
I used a 100mm long bolt that went right though
the bark buster fitting & stuck out so the vibanator
could be screwed on to it....The only thing is I
couldn't find a 100mm long bolt with enough thread on it
so I had to cut the thread longer...
Yer need enough thread sticking out to screw the vibanotor
on as well as a backing nut to lock the vibanator against..

Yes the ones in the link would work just fine....

In fact mine are off the bike at the moment...
I could post a pic of them if yer wish..





.

__________________
Harley Davidson..
The easyest way to turn gasoline into noise with out the side efect of horse power...