Quote:
Originally Posted by
spen
you have ened up with a block connector ,which is what i wanted to get rid of as this seems to be where the heat is generated and causes the problems .The problem is not with the REG itself but the situation and poor fitment of the connector I just read Stoic Blokes fix on here and hard wired mine into the loom .I also have the little charge warning light fitted
|
Yeah still a connector (x2 now) but much beefier than the standard tiny ones. The problem I found with the originals is that they are just to loose which causes arcing and overheating which then melts the connector. I took them all out and gave them a squeeze the second time it died and it was golden after that. I just didn't want to take any more chances so upgraded it all.