Making Of Tail Light:

ok so inspired by all the images, and after carefully readied every single info i could find on this topic we started with cutting the tail. There is an old saying in my language - " 3 puta meri jednom seci " which would mean mean something like 3 time measure one time cut… well we measured only 2 times so unfrtinetly we cuted it 5mm shorter

Dissembled



Measuring



Cutting (at this point we tought we could save top part of plastic to be some kind of roof over LED tail light.. but it turned out we had to take it all...



Modeling


Tadaaaa:




after this it was again dissembled and sent on powder-coatingin in black. Final results was weary nice as you can see...



Wiring and fitting indicators - because original tail plastic is little bit curved we had to fit indicators with pre sharped plastic spacers that Nikola made





and the final product would be like this:



Licence plate is fitted later a little bit "illegal" and soon ill have to find better position for it.. this way i can be spotted by cameras and ticketed for illegal plate placement... so i dont have any real benefit form placing it like this.

__________________