Quote:
Originally Posted by
Gas_Up_Lets_Go
No not the size of the socket, the specification of the nut, 32mm is the outside, what about the inside ???
|
FWIW, I wouldn't bother with a socket - try an angle grinder!
Had a long bar (trolley jack lever) on the socket on my Ten with the rear brake locked solid........stood on bar, bounced a bit and the freakin' socket still won't budge! The nut is torqued to 85 ft-lb (12kgm)!!!! Twice the torque output of the engine.
WHY???? Suzuki's DR650/750/800 sprocket nut is held in place by a locking plate which in turn is screwed to the sprocket with 3x M10 bolts.....
