Thread: will it make a difference
View Single Post
  # 9  
Old 23-06-10, 11:08
Kev's Avatar
Kev Kev is offline
Administrator
 
Join Date: May 2006
Location: Brisbane, Australia
Posts: 6,063
Kev is on a distinguished road
Quote:
Originally Posted by Freez View Post
If you install the full range of DNA filter, stage 1, 2 and 3, and a powercommander, that already will give you a big power gain, right from idle. The cans will improve than even further, especially low end torque. Leo Vince cans work very well, better than the Akra's.

I have seen a 6 to 8 HP gain from the filters, Powercommander and Leo Vince cans on the Tenere. It might sound small, but that’s a 15 to 20% gain over stock.

The Kev mod will not be able to supply the required fuel for the set of DNA filters and cans. You will have to go for the PC.
My new stage 3 fuel mod can get the air/fuel ratio down to an avearge of 13.5/1 with my stage 3 airbox with carbon can exhausts on my XTX. But do agree a power commander is the way to go with a custom made fuel map if you want the optimun performance.

Freez you must have missed my past postings with a data logged A/F tests using my wideband commander with the above set up. I have also found a way to turn the O2 senor off to stop the surging on my XT660X.

http://www.youtube.com/watch?v=ZwTfuwZZ848&feature=channel

http://www.youtube.com/watch?v=1Y9mqJtXtm4&feature=channel

http://www.youtube.com/watch?v=glkdBO8aZm0&feature=channel
__________________
Click here to join the XT Supporter's scheme

Mods that I have done to my XTX's

My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm / Modified Crank Case to take a 105mm Raptor Cylinder / 11:1 102mm JE Raptor piston / Stage 1 Raptor Hot Cam / Ported head / Colder Spark Plug / +2mm Throttle body / DNA stage 1 & 2 filters / Modified Air Box / Snorkel removed / Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts / Recovered seat in Black / O2 Eliminator /

My 09 XTX
59HP at the rear wheel / Stage 2 Raptor Hot Cam / DNA stage 3 Air Box / Carbon Can Exhausts / Modified Exhaust Link Pipes / PCIII With Custom Fuel Map / Wideband Commander O2 Data logger / LCD100 Dyno Jet display & fuel adjuster / 2500 OHM HT lead instead of a 10K OHM XT lead / Extra Coolant Cooler / Protaper Fat Bars / Tail Tidy With LED Tail Light / OKE Protection Knobs / LED indicators / AIS blocked / Modified rear sprocket rubbers / Rear Foot Pegs removed / 09 ECU With 02 Sensor Changed To A 06 ECU / Complete wiring harnes Changed from 09 to 04 / Home made LED resistor flasher / Hole drilled in the fuel tank filler neck to allow quicker filling / Modified Bar End Weights / Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer / Changed front & rear guards from blue to black / 47T rear sprocket / Speedo Healer V4.0 / Kev throttle cam mod / Throttle grip mod / The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details

Now ride a 2018 MT09SP ABS + TCS

My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946

Last edited by Kev; 23-06-10 at 11:17.