=piotrmacheta;130720]Hi everyone,
Great forum with loads of interesting stuff. Although I've had my Tenere for a year now this is my first post and dip into modding it.
Welcome to your first post
I bought the bike for touring and my journeys so far have identified some of the same problems as you have been addressing - numb bum from the seat, lots of wind buffeting and noise and also vibration through the bars leading to numb fingers.
I want to cure these now and particularly the vibes. Does anyone know if these (rather expensive) Flex bars work with the Tenere and what size/rise do I need to get
I do not know of anyone using them on a XT660, the Raptor boys use them alot & like them - what degrees and rise are the originals?
Not sure on the XTZ bars.The TT website sells some bars with different angles but no anti-vibe. I'm 188cm (6ft 2) if it helps.
Also, what is the recommended exhaust to fit on. I was hoping for a few more horses for the overtakes but nothing too noisy.
If you want extra HP then fit a stage 1, 2 or 3 DNA filter, the air box is where these bikes are restricted.
Thanks for any advice.
Peter
__________________
Click here to join the XT Supporter's scheme
Mods that I have done to my XTX's
My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm
/
Modified Crank Case to take a 105mm Raptor Cylinder
/
11:1 102mm JE Raptor piston
/
Stage 1 Raptor Hot Cam
/
Ported head
/
Colder Spark Plug
/
+2mm Throttle body
/
DNA stage 1 & 2 filters
/
Modified Air Box
/
Snorkel removed
/
Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts
/
Recovered seat in Black
/
O2 Eliminator
/
My 09 XTX
59HP
at the rear wheel
/
Stage 2 Raptor Hot Cam
/
DNA stage 3 Air Box
/
Carbon Can Exhausts
/
Modified Exhaust Link Pipes
/
PCIII With Custom Fuel Map
/
Wideband Commander O2 Data logger
/
LCD100 Dyno Jet display & fuel adjuster
/
2500 OHM HT lead instead of a 10K OHM XT lead
/
Extra Coolant Cooler
/
Protaper Fat Bars
/
Tail Tidy With LED Tail Light
/
OKE Protection Knobs
/
LED indicators
/
AIS blocked
/
Modified rear sprocket rubbers
/
Rear Foot Pegs removed
/
09 ECU With 02 Sensor Changed To A 06 ECU
/
Complete wiring harnes Changed from 09 to 04
/
Home made LED resistor flasher
/
Hole drilled in the fuel tank filler neck to allow quicker filling
/
Modified Bar End Weights
/
Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer
/
Changed front & rear guards from blue to black
/
47T rear sprocket
/
Speedo Healer V4.0
/
Kev throttle cam mod
/
Throttle grip mod
/
The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details
Now ride a 2018 MT09SP ABS + TCS
My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946
|