Hi Loopydog and welcome to the fold. Pleased you are having a good experience with your new baby. Make sure the connector block on the top of the reg/ rectifier is fully home and you shouldn't have any problems.
To change from MPH to KPH press and hold both buttons, THEN turn on the ignition, release the buttons and the display will flash then settle down to display kph or mph as required.
Hope this helps.
PS I'm the one that has had a crap experience with the reg / rectifier and least weeekend I thoroughly hammered it up in the Dales in horrible weather. Now the new loom is on all seems well.
