|
[quote=bonjo;106364]Kev
Thanks for the feedback.
OK one descriptive mistake on my part, "DIAG" and "CO" do not flash.
I first turn the bike ignition switch to ON. (I have tried it with both kill sw on & off)
Now I have tried all combinations of "SELTECT" & "RESET" buttons. Just get the display to swap between "DIAG" and "CO".
Am I still missing something? Or maybe on the 09 model access to this menu has been restricted.[/quote
It should work on a 09 XT try this.
Switch off Engine Run switch, switch OFF Key switch.
1/ Press both SELECT & RESET buttons and then switch ON Key switch, keep SELECT & RESET buttons pressed for at least 8 seconds. Display then changes to "DIAG". Release SELECT & RESET buttons.
2/ Press the SELECT button once until CO displays, press SELECT & RESET buttons again, CO1 should display.
3/ Once selected CO1, switch on the kill switch & crank the motor. Once started the rev counter should be in the right side of the LCD screen.
Hope that works for you.
__________________
Click here to join the XT Supporter's scheme
Mods that I have done to my XTX's
My 04 XTX
Stage 1 & 2 DNA filters / Kev fuel mod / snorkel mod / Drilled air box mod / Engine breather mod / Fork Spacer mod / 15w fork oil /
[
My 07 XTX
Raptor 700 cylinder 102mm
/
Modified Crank Case to take a 105mm Raptor Cylinder
/
11:1 102mm JE Raptor piston
/
Stage 1 Raptor Hot Cam
/
Ported head
/
Colder Spark Plug
/
+2mm Throttle body
/
DNA stage 1 & 2 filters
/
Modified Air Box
/
Snorkel removed
/
Worry Brothers stage 2 filter cover / 6mm & 8mm Bolts Replaced with Titanium Bolts
/
Recovered seat in Black
/
O2 Eliminator
/
My 09 XTX
59HP
at the rear wheel
/
Stage 2 Raptor Hot Cam
/
DNA stage 3 Air Box
/
Carbon Can Exhausts
/
Modified Exhaust Link Pipes
/
PCIII With Custom Fuel Map
/
Wideband Commander O2 Data logger
/
LCD100 Dyno Jet display & fuel adjuster
/
2500 OHM HT lead instead of a 10K OHM XT lead
/
Extra Coolant Cooler
/
Protaper Fat Bars
/
Tail Tidy With LED Tail Light
/
OKE Protection Knobs
/
LED indicators
/
AIS blocked
/
Modified rear sprocket rubbers
/
Rear Foot Pegs removed
/
09 ECU With 02 Sensor Changed To A 06 ECU
/
Complete wiring harnes Changed from 09 to 04
/
Home made LED resistor flasher
/
Hole drilled in the fuel tank filler neck to allow quicker filling
/
Modified Bar End Weights
/
Progressive front fork springs, 15W fork oil, forks lowered 25mm, used XTR rear links lowering the rear 20mm, rear spring one click stiffer
/
Changed front & rear guards from blue to black
/
47T rear sprocket
/
Speedo Healer V4.0
/
Kev throttle cam mod
/
Throttle grip mod
/
The new 2010 O2 sensor mod is out, works a treat, The new 2012 O2 Controller is out, PM me for details
Now ride a 2018 MT09SP ABS + TCS
My KTM 990 SMR Mod book. http://www.ktmsmt.com/viewtopic.php?f=13&t=4946
|